PRO CLEAN MOUSSE-LUBE (250ml)

Product Information

To change a bib mousse, it’s best to use the right tools for the job. Rabaconda 3-Minute Tire Changer was designed specifically for this purpose: changing bib mousses in dirt bike tires. Whether it’s enduro, motocross, trail riding, rally, or simply leisure dirt biking, the 3-Minute Tire Changer is the easiest and fastest way to change bib mousses. If mousse stands in the tire for a longer time, the wheels should be turned further before the first use, because with time the entire mousse gel collects in the bottom of the tire and is no longer available for the entire mousse. Mousse is very robust but not indestructible . So that you can ride your mousse as long as possible, it is important to treat it properly. This includes not storing it in the sun or next to the heater. Heat over a longer period of time causes enormous damage to the mousse.

Another important thing to take into consideration is the storage temperature of your bib mousse. A bib mousse will typically start to expand at temperatures above 30 degrees Celsius / 86 degrees Fahrenheit, so it’s best to keep them stored in an air-conditioned or generally cooler room. Avoiding flat tires is the number one reason to use mousses, but there’s more to it. Once you get used to how your tires feel with bib mousse inserts, you may actually prefer how it helps the tire grip.As mentioned before, it is typical for a bib mousse to weigh about a pound more than a standard heavy-duty motocross tube. You can find bib mousse inserts available in all sizes to suit small wheels all the way up to large wheels. It is typical for most companies to start at 18” for mousse inserts. However, there are a select few companies that do offer smaller sizes - X-Grip does sizes starting from 12”. Some riders cut down larger mousse inserts to fit smaller tires. This is generally not recommended but can work under the right circumstances. Pro Clean Mousse Lube is a specially developed gel with super low friction characteristics. This super low friction not only aids the fitting of the mousse but also keeps the temperature of the mousse lower when in use, preventing rapid drying and deterioration and therefore improving the life span of the mousse.

We ship goods across mainland UK and Northern Ireland (please note we cannot ship tyres and mousses to Northern Ireland due our courier size restrictions).Flip the wheel over so that it rests on the tire changing stand again. Use the bead breaker to push down on the tire right above where the bead started to pop off on the other side. The tire should now start to come off. Once the bead of the tire is off, keep turning the wheel and pressing the bead breaker to push down the rest of the tire (mousse). Once this is done, the tire is hanging on the upper bead that has not been dismounted yet. Pull the bead breaker as close to the rim as possible and find a good spot to push down the side over the rim to completely remove it. When it starts to come off, spin the wheel and use the bead breaker to push the tire all the way off until it falls down. Curved tire irons are best for mounting as they reduce the effort; remember that mousses last longer than tires, so if you’re putting an old mousse into a new tire, clean it with a cotton cloth before using it. On the other hand, as a result of the mousse's solid structure, the only way to adjust the feel is by selecting a softer mousse. Unlike a regular air tube, where you can change the PSI for different riding environments, a bib mousse retains one feel all of the time (until it starts to deteriorate).