Ubiquiti UAP-AC-IW Unifi AP-AC-IW IN WALL Access Point - (Enterprise Computing > Wireless Networking)

Product Information

PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server. To specify which AP and which band was being used, I used the settings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests.

An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE. These results show how the AP performs when it’s 5 GHz signal is hovering around -80 dBm RSSI and around 10 SNR. From the same location 2.4 GHz connections are stronger and more stable. Note for International Readers Unifi UAP-AC-IW สร้างมาสำหรับการติดตั้งในผนัง ด้วยการออกแบบที่เหมาะสมกับการใช้งานในที่ต่าง ๆ ไม่ว่าจะเป็นห้องนอน, ห้องประชุม, ห้องพักโรงแรม หรือในสถานที่ทำงาน เปิดโอกาสให้คุณเชื่อมต่อไร้สายได้อย่างสะดวกสบายและมีประสิทธิภาพ PoE In + Data 10/100/1000 Ethernet port supports data and 802.3at PoE+ input. The UAP-AC-IW-PRO itself requires 10W.

Ubiquiti UniFi UAP-AC-IW-5 In-Wall Access Point (5 Pack)

Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). The maximum PoE passthrough output is 12W. Ubiquiti Networks Unifi UAP-AC-IW วันนี้! เปลี่ยนประสบการณ์การใช้งานอินเตอร์เน็ตของคุณให้ดียิ่งขึ้นด้วยอุปกรณ์ที่คุณคู่ควร! Looks like some of their APs are going EoL 1 March 2021, which means that any controller versions later than this will not allow you to configure the equipment.

End of Life (EOL): Device will be visible, but not configurable, in controllers released after the EOL date. It will continue to operate with its current configuration, and the controller will be able to forget the device. I want to reach out and announce that we are starting the EOL lifecycle for the following models of UniFi AP: Devices will lose controller support in a controller version that is released AFTER the EOL date, and it will be clearly announced in release notes. In other words, it should be clear to the user before the upgrade happens, that the upgrade will terminate support. Dual band, 802.11ac Wave 1 access point with a 2+ Gbps aggregate throughput rate that can be plugged into a standard wall outlet.

Wi-Fi 802.11ac คุณสามารถเชื่อมต่ออุปกรณ์อิเล็กทรอนิกส์หลาย ๆ ตัวของคุณให้สามารถใช้งานอินเตอร์เน็ตไร้สายได้อย่างรวดเร็วและมีความน่าเชื่อถือ ไม่ว่าจะเป็นสมาร์ทโฟน, แท็บเล็ต, คอมพิวเตอร์โน้ตบุ๊ค หรืออุปกรณ์อื่น ๆ Unifi UAP-AC-IW คุณสามารถสั่งซื้อและติดตั้งได้อย่างง่ายดาย อย่าพลาดโอกาสที่จะเพิ่มประสิทธิภาพในการใช้งานอินเตอร์เน็ตไร้สายในพื้นที่ของคุณ

We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: The U6-Pro has the best 2.4 GHz performance, due to it being the only model tested with Wi-Fi 6 support. 5 GHz performance depends on a lot of factors, but the AC-HD, U6-LR and U6-Pro performed the best overall. I don’t have a reliable way to test multi-client performance yet, but they should also offer the most performance in multi-client tests and realistic use. We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen. IMPORTANT: The UAP-AC-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.

Back Panel

Ubiquiti's UniFi AP AC IW (In-Wall) Access Point transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. The device features two additional Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network; both ports can be found on the base of the device. I ran all of my tests with multiple TCP streams, and occasionally reversed the direction as a point of comparison. These tests ran for 60 seconds, so a typical client command would look like: iperf3 -c 172.25.10.5 -P 8 -R -t 60 Unifi UAP-AC-IW มาพร้อมกับซอฟต์แวร์ Unifi Network Controller ที่ให้ควบคุมและจัดการเครือข่ายของคุณได้ง่ายขึ้น ตั้งค่าเครือข่าย, ตรวจสอบสถิติการใช้งาน, และปรับปรุงความปลอดภัยของเครือข่ายของคุณ GHz signals extend this circle out a bit, but with a few walls in the way, getting low SNR links and slow performance is likely. If there is clear line of sight AP range can extend much further, but every wall imposes a dBm penalty. Wall material and quantity are usually more important than distance in a home or small business network. IMPORTANT: The UAP-AC-IW-PRO requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.