Danalock V3 BT Z-Wave Silver EURO

Product Information

Open the door, insert the key, and turn it. If the thumbturn on the inside of the door doesn’t rotate along with the key, you need to enable End to End Operation. If you use a key on the inside, you can in most cases simply replace the inside cylinder with the tailpiece in the box. This function is not supported on all smart hubs - please consult your hub manufacturer's guide. Through your hub

On most Android phones today, the phone removes the app's permissions if the app isn't used for a couple of months - meaning if the app is not opened! On both Android and iOS devices - make sure that the app has location permission set to "Always allow".The hardware bridge is of course a LOT more stable, but I don’t see the need for it, when I have the z-wave integration to HA Please note, that for now, it is not possible to give your pin codes alias names. It is on our list for future development - time estimate unknown.

I wouldn’t buy the bridge, just my 2 cents, I had the bridge running on a phone for a long while, and it was very unstable, so I switched to HA as they were simply too slow to release the standalone bridge (waited for more than a year), and now operate it through that, works every time. We are currently working on reimplementing the Airbnb feature. We can't say when this will be released. As you already have z-wave, I would go for the bluetooth+z-wave. If I could choose today, I would probably select zigbee instead, as the rest of the house is on zigbee Easy to fit.Easy to install to any kind of door. See the installation guides in the Product Files section below.For Euro cylinders, you will need to have a cylinder with a tailpiece mounted. This type of cylinder can be bought separately. Look for "Permissions" or similar and set the location permission to "Always/Allow all the time " or similar.