G Thread (Metric BSPP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 3/4 inch)

Product Information

Compared with other same products in the market, this shower hose joint has thicker interface, explosion-proof and pressure-resistant, more durable, suitable for Grohe tap, ballfix valve, the adapter can be applied for 13mm EU taps and 15mm UK faucet, and with the rubber washer make more sealed and leak-proof.

Inch BSP - Outlet thread on 3/4 inch outside tap (we have a 7/8 inch BSP brass garden hose tap connector). I have a pressure sensor for use on air with a G1/4 female process connection and would like to convert it so it can accept 6mm OD tubing. Have you ever looked at a pressure gauge in a pipe assembly and wondered which connection type it has?They are both the same, since the ’19’ refers to 19 threads per inch (tpi) which is the standard thread pitch for a 1/4 BSP P thread. This thread type, standardized by ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers), is typical among North American measuring instruments, found in piping systems, pumps, compressors, plumbing systems, mobile working machines, and many more applications. At least 41 thread sizes have been defined, ranging from 1⁄ 16 to 18, although of these only 15 are included in ISO 7 and 24 in ISO 228.

To assist you with any product related question we created a request form which enables you to contact us in the most convenient way. To avoid the problem of awkward gauge positioning, use a “crush washer” and hand-tighten the connection. As for the “A” or “B” in some name, such as the common G ¼ B connection type, the letter denote lets users know 1) it’s a male thread, as female BSP threads don’t have a final letter, and 2) its tolerance class. Due to the spiral leak path, however, Teflon® tape (PTFE) or a sealing compound is required to create a good seal. Choose this straight adaptor from RS PRO for leak-free and stable connections for your pneumatic system.BSP sizes don't match up with what you measure on the scale of a ruler, which can obviously cause some confusion. The taper is 1:16, meaning that for each 16 units of measurement increase in the distance from the end, the diameter increases by 1 unit of measurement. The adapter has a built-in O ring seal which acts the same as bonded or dowty seal for sealing the 1/4 BSP (G1/4) thread end. As sealing of the connection takes place on the washer and not on the thread itself, no sealing compound or PTFE tape is required. We suggest you contact Wika or ABB, which are both instrumentation manufacturers that specialize in the supply of differential pressure transmitters with oil filled diaphragm seals and capillary tubing.

Taper threads, British Standard Pipe Taper thread ( BSPT), whose diameter increases or decreases along the length of the thread; denoted by the letter R. If you select "Continue" or continue to browse the site without customizing your choices, you agree to our use of cookies.In the modern standard metric version, it is simply a size number, where listed diameter size is the major outer diameter of the external thread.