300Bar 4500Psi Pcp Compressor Electric Air Compressor for air Rifles Paintball Tank 220V TUXING

Product Information

I've been using it to top up a 4 litre 300 bar bottle, takes around 10 min to top up from 180 to 300 bar. One slight technicality Mike, at certain times of the year we’re shooting 100’s of mice inside an egg farm, you can easily go through a tin of pellets each in an evening,the sheds are up to 140m long, we need a mobile air tank to service a number of shooters stationed within so we use a tank. In addition, the compressor features an upgraded LED temperature display, explosion-proof valve, and stainless steel cylinder.

Got to unpacking and it looks like some updates have been made compared to some of the units on Youtube. So here goes: Filling the Scorpion from a residual 100 bar up to 200 bar, the BSA Compressor took 1min, 45 seconds. This will activate as soon as the compressor is plugged into the mains but you still have an on/off switch on the actual compressor. There are various forms of oil and water filters to produce clean air though prolly not to SCUBA standard of course.Includes a clear, comprehensive User Manual in ‘English, English’ so that users can use their new compressor safely and efficiently from the get-go. I am wondering if i'm going to have the same problem matching 1/8 BSP female cone seat with these as well because the pictures/diagrams are pretty rare. You can lose your **** attitude for a start, I don’t have a set up as I have a 300 bar compressor available at work. Not planning to do anything but the thought has been bugging me and I believe the answer is probably the air compressor unable to reach the air pressure required by PCP but wanted to check on the facts with the more experienced folks. This wasn't possible because the whip line had an 60 degree seat cone female and the adapter was flat faced and the thread was not quite the same, so I didn't want to force it.

Divers understand or should about air fills and what to look for but with the lads with a pcp's they just want a fill. Unlike some other PCP compressors, the Air Rover uses a unique DRI-PAK filtration system, housed in an oversized brass filter tube, which is filled with desiccated moisture-absorbing media that removes 95%+ of the moisture from the air , thus protecting your valuable gun from corrosion.I am really happy with this purchase and have recommended this 350W compressor to friends at the range. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. At this point, I should point out clubs considering the purchase of a compressor to fill bottles etc, should look for larger, dedicated models because BSA are pitching this model toward direct charging of the gun only, and not bottles themselves.

Most browsers allow you to block cookies within their settings and we have provided links to the most commonly used browsers.When tested, the Air Rover was able to fill a 216cc cylinder on an Air Arms S410 Classic from 90 Bar to 200 BAR in as little as 4. With a dive cylinder you can lay it in the tank, with a surface cylinder the filling gauge is for surface use only. is authorised and regulated by the Financial Conduct Authority, register number 689922 and act as a credit broker and not a lender. But I don't use it [the big filter] with the hand pump because it is twice the volume of the rifle cylinders and you would be pressurising three times the amount of air. Choose from our Compressors or see our Pumps or Cylinders for the best way to fill your PCP air Rifles and Air Guns.

However, the third realistic option is to purchase an air compressor, and with an increasing number of manufacturers entering the market, there is now an impressive array of models available. There are no catches, no small print and no hidden terms and conditions, it really is as simple as it sounds. Whether filling a PCP airgun from empty or just topping off, the Air Rover fills quickly and efficiently. The first payment is due at the time of purchase, and the next two payments are scheduled for the same date in the following months.

I believe the air inside the cylinder has to be clear of moisture, which is possibly difficult to do with a normal air compressor. The Temp gauge was already on so I can assume that the battery will go flat as there is no off option.